Allied Telesis AT-DMC100/ST-50 100Mbit/s 1310nm Multi-mode network media converter - Networking

DMC SeriesGigabit Desktop USB-Powered Media Converters The Allied Telesis DMC Series of Gigabit mini media converters are among the smallest media converters in the market today.Overview At just 1.25 inches wide × 3.6 inches deep × 0.85 inches high, Allied Telesis DMC Series media converters can easily fit into the palm of a hand. In addition to being compact—with a small carbon footprint—the DMC Series can also be powered with the included Micro USB to USB cable, and plugged directly into a laptop or PC or may also be powered via the optional AC/DC adapter. This saves installation time and cabling as there are no further power requirements. Fiber Connections The Allied Telesis range of Gigabit media converters provides a complete family of conversion devices, allowing users to extend the size of UTP networks with the use of fiber cabling. Supporting SC, ST and LC fiber connectors, these converters can be used to extend networks with up to 500m of multi-mode fiber.VLAN Support Many new backbone switch products now support the industry-standard IEEE 802.1Q specification for Virtual LANs (VLANs) that send data packets on the network. DMC Series media converters are fully compatible with Smart MissingLink (SML) The Smart MissingLink™ (SML) feature monitors network connections and provides notification when network segments fail, allowing network managers to quickly identify the source and location of failed segments and minimize downtime.Simple Instal

Networking
Packet forwarding rate (100 Mbps)	148800 pps
Packet forwarding rate (10 Mbps)	1488000 pps
Packet forwarding rate (1 Gbps)	14880 pps
Rate limiting	Yes
Cable types supported	Fiber
Converter input interface	100Base-TX
Fiber optic connector	ST
Ethernet LAN data rates	100 Mbit/s
Duplex system	Full, Half
Converter output interface	100Base-FX
Auto MDI/MDI-X	Yes
Data transfer rate (max)	100 Mbit/s
Technical details
Wavelength	1310 nm
Maximum transfer distance	2000 m
Fiber mode structure	Multi-mode
Internal	No
Ports & interfaces
Fiber optic connector	ST
DC-in jack	Yes
Performance
Wavelength	1310 nm
Maximum transfer distance	2000 m
Fiber mode structure	Multi-mode
Design
Internal	No
Packaging content
AC adapter included	Yes
Operational conditions
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-15 - 65 °C
Operating relative humidity (H-H)	5 - 95%
Storage relative humidity (H-H)	5 - 95%
Operating altitude	0 - 3048 m
Weight & dimensions
Width	31.8 mm
Depth	91.4 mm
Weight	113.39 g
Height	21.6 mm

1. Anything which is certainly not a 3D memory product once processed can't be returned for credit or cancelled. Restocking fee of minimum up to 25% can be charged on certain products which varies from product to product.
2. All product by default go to check in refurbished condition unless changed to new retail. All products comes with 30 days warranty and manufacturer warranty remains intact if applicable.
3. This item can be dispatched in 3-4 business days or based on the availability. Please check with our customer support (786)-840-0395 if you need the item to be shipped same day.
4. Please note that most of the large manufacturers (e.g. HP, Dell, IBM, Compaq,) part numbers which have established corresponding spare part numbers (spare P/N#), or field replacement part numbers (FRU#'s) for their products. When you receive the part, it may display this FRU # or Spare P/N# on it. You can simply reference this part number as a valid replacement part for your ordered item at any of the manufacturer websites. If any assistance needed in this regard please call our Sales Department.
5. This part number has 30 days limited DOA exchange warranty for replacement only with the same part. A few drives may have 90 days warranty which you can confirm. The item might have other warranties like manufacturer, service, or extended warranty that you can affirm with the sales department.
6. All equipment sold are bulk equipment without any drivers and cd included. If you need a driver or CD installation for a particular part/item please call to confirm availability.
7. Our online shipping calculator is based to compute shipping for memory, hard drive and different items that are under 5 lbs. It may not calculate the right shipping cost of items that are in excess of 5 lbs. Kindly call us to confirm before you submit the order for items that are heavyweight in shipping. If you submitted the order by mistake you will receive an email or call from our customer service department with the right shipping charges. Some of the items that come in this class are motherboards, servers, racks.
8. Item pictures are only for illustrative purposes therefore the delivered product might differ from the one displayed above.
9. At times, packaging can vary from OEM/original retail box. They are packaged together for bulk orders.
10. Orders of end of life (EOL) products or end of sale (EOS) that are no longer in production can be replaced by a compatible item with the exact FRU number performing same functionality.
11. Refurbished printers might not have laser toners or full ink cartridges.
12. Please note if you have question about any of the above conditions or have any concerns, we suggest you to contact us on support@intravisionetworks.com or call (786)-840-0395 before submitting an order.

No reviews to show!